Drone construction based on navio2

Navio / Edge Getting started
1

Hello
I am trying to build a drone based on navio2.
The objective being to broadcast the video via 3G / 4G, or even to control the drone via 3G / 4G or radio.

From what I saw it is possible to do with the navio2.

Being new to drones (but accustomed to Raspberry and Linux) I planned the hardware of the drone:
4 motor 2212 (4*50 = 200g)

https://www.banggood.com/fr/4X-Racerstar-Racing-Edition-2212-BR2212-920KV-2-4S-Brushless-Motor-For-350-380-400-Frame-Kit-p-1083198.html?gmcCountry=FR&currency=EUR&createTmp=1&utm_source=googleshopping&utm_medium=cpc_bgs&utm_content=frank&utm_campaign=frank-ssc-fr-all-0403-19cov&ad_id=429938932454&gclid=EAIaIQobChMIqrrFgK6h6QIVl4XVCh3j8AVpEAQYASABEgJkRfD_BwE&cur_warehouse=CN

4 helice tripales 8" (4* 15.5 = 62g)

ESC 30A (4*9 = 36g)

frameST360 (170g)

flight controller + LTE (90g)
https://www.robotshop.com/eu/fr/plat…ry-pi-2-3.html
https://www.amazon.fr/Raspberry-Pi-3…/dp/B07BDR5PDW

https://www.amazon.fr/Huawei-E3372s-153-débloquée-Paquets-Vitesses/dp/B07SHG96B6

radio
https://www.studiosport.fr/radio-fly…6b-a16809.html

battery 3200mAh (302g)

power battery

What do you think of the configuration? Weight announced about 860g without cable.
Do you think that the autonomy could be 15min at least?

Thanks

1 Like
5

Hi Florent,

I’d recommend using the eCalc tool to check if this hardware setup will suit your needs.

7

This topic was automatically closed 100 days after the last reply. New replies are no longer allowed.