Creating a RPI Ap

Navio / Edge Raspbian
1

Hello.

I want to create a network AP on a raspberry pi. I have 2 USB extenders that I need to TX and RX in the same IP range. So basically I want to keep Wifi 0 with access to my home network AP and then use Wifi 1 and 2 as an AP that my Navio2 can connect 2

3

Anyone have any tips on creating an ADHoc Wifi network between Navion 2 and a Raspberry pi with 2 wifi extenders on the ground station?

4

Hi @Barry_Bolton,

This guide from RPi docs might be helpful.

I’d also recommend paying attention to the create_ap tool.

6

This topic was automatically closed 100 days after the last reply. New replies are no longer allowed.