dear all, I have 2 reach, Base and rover connection over wifi work fine. Now i need to go the next step and connect them over a 3dr modem. I have 2 modems: one serial version and one usb version. They came in that configuration. I connection the usb modem to the base and connect the serial versio…

[image] Andreas_Ortner: try to switch to bautrate 57600at every unitand Also, it’s a good idea to check whether you have TX and RX wires mixed up. It’s a common mistake when working with UART. @Andreas_Ortner thx for the hint again, though I read it aleady seravle time I didn’t try it until …

Base and rover connection with radios does not work

Reach Module / M+ / M2 Hardware integration

mikhail.avkhimenia (Mikhail) August 10, 2016, 1:56pm 17

There’s an issue with radios over USB. We are working on it.