[details="Simple system report"] ``` app version: 2.10.0-r0 'wifi_status, interface: wlan0': - Client state - IP address: 192.168.5.61 mac address: fc:db:b3:7f:18:53 ssid: Mjesto pod suncem d.o.o. base mode: base coordinates: accumulation: '2' antenna offset: east: '0' north: '0' up: '0' coordinates: - '0' - '0' - '0' format: llh mode: single-and-hold output: enabled: true format: rtcm3 path: tcpsvr://:9000#rtcm3 type: tcpsvr rtcm3 messages: '1002': enabled: true frequency: '1' '1006': enabled: true frequency: '0.1' '1008': enabled: false frequency: '1' '1010': enabled: true frequency: '1' '1019': enabled: false frequency: '1' '1020': enabled: false frequency: '1' '1097': enabled: false frequency: '1' '1107': enabled: false frequency: '1' '1117': enabled: false frequency: '1' '1127': enabled: false frequency: '1' bluetooth: discoverable: true enabled: true pin: '***' correction input: input2: enabled: false format: rtcm3 path: mps201:***@195.29.118.122:2101/CROPOS_VRS_RTCM31 send position to base: single type: ntripcli input3: enabled: false format: rtcm3 path: :9028 type: tcpsvr logging: base: format: RTCM3 started: true version: null correction: format: RTCM3 started: true version: null interval: 24 overwrite: true raw: format: UBX started: true version: null solution: format: LLH started: true version: null lora: air rate: 2.6000000000000001 frequency: 868000 output power: 20 position output: output1: enabled: true format: nmea path: bluetooth type: bluetooth output2: enabled: true format: llh path: :2013 type: tcpsvr rtk settings: elevation mask angle: '15' glonass ar mode: 'off' gps ar mode: fix-and-hold max horizontal acceleration: '1' max vertical acceleration: '1' positioning mode: kinematic positioning systems: compass: false galileo: false glonass: false gps: true qzs: true qzss: false sbas: true snr mask: '35' update rate: '5' ``` [/details]