I am working on my new quadcopter and I have same difficulties on the setup in the app QGRUONDCONTROL. I calibrated the accelerometer but I can not calibrate the radio. I have a FS-iA6B receiver and a Flysky FS-I6S transmitter.
I connected the FS-iA6B as you can see in the picture (channel 1). The FS-iA6B works fine since I connected it to the FS-I6S and I calibrated the ESCs perfectly. Also I connected the RPI and Navio2 to the qgrpundstation app properly and calibrated the accelerometer but I can not calibrate the radio (there is no response when I move throttle or any other thing).
Please help me to resolve this issue.
Looking at the picture I can see that the cable going to Navio2 is connected to CH2 on the receiver, while it should be connected to the PPM output.
In the picture it seems to be in channel 2 but it is connected to channel 1.
This topic was automatically closed after 100 days. New replies are no longer allowed.