Hi @BenLewis,
Could you share with us how it is working with this configuration? (are you able to experience a continuos fix?) and exactly which configuration are you using currently.
I have been trying with the following settings that was tried by @BenLewis with latest ReachView version which includes new LoRa driver:
LoRa air data rate: 9.11 bk/s
1002 GPS L1 observations: 1 Hz
1006 ARP station coordinates: 0.1 Hz
1097 GALILEO: 0.5 Hz
And using GPS, Galileo, SBAS, QZSS on Spain (Europe) at 10Hz.
I was experiencing a continuos flickering between float and fix, which I imagine it was produced by Galileo corrections frequency (1 each 2 seconds). After setting 1Hz I was able to achieve a fix, but I’m not getting able to get an enough consistent fix.
I’m usually working with an unobstructed sky view with the rover mounted in the following vehicle:
Also wondering if vibrations or pendular movement could affect the fix.
Any help on how to proper configure two Reach RS with LoRa for getting good results on my case will be welcome 
Thanks!
Iván