Reach failed on test1 and test2

Hi,

I am in posession of a Reach RTK module. I have hooked it up to a power supply and connected it to our network. The module worked fine, I could access the web interface and I got GPS positions.

However today when I connected the module again it gives me an error. First it seems to boot normally, it also connects to the wifi network and I can connect to it through reach.local on firefox.

It does not pass test1 and test2, it does pass all the other points.
The LED is blinking in red, and every 3 red blinks the LED turns blue for a second or so.

The device is running ReachView version: 2.10.0-r0.

What is wrong? What does it mean that it is not passing the tests, and what can I do to debug?

1 Like

Hi,

I saw that you’ve emailed our technical support about this issue. I am closing this topic.

Please create a new thread if you have any questions.

1 Like