Hi! I downloaded the Firmware 31 (reach-rs2-v31.0-r3) and I installed it using the Reach Firmware Flash Tool 1.9.2. in my RS2. When I started with the Base configuration, on GNSS Settings, there is not Positioning Mode available and I could not select between Static or Kinematic mode. I did t…

Yup its removed as explained in some recent posts [image] Reach Firmware 31 Beta 3 is out News Hi @mark1st.john , Yes, we removed the Static option for the Positioning mode in the GNSS settings of multi-band receivers. It will use the Kinematic option as a default. It’ll …

Positioning Mode selection missing after Firmware 31

Reach RS2 / RS2+ RTK / PPK configuration

davehofer1993 (David Hofer) August 2, 2023, 11:24pm 2

Yup its removed as explained in some recent posts

5 Likes