Pixhawk and Reach integration problems

[igor.vereninov]

Check out this thread:

Position corrections not received by pixhawk

My apologies here is the fol on RTK Settings- Base and Rover : Position Mode-Kinematic : GPS AR Mode-Fix and Hold : GLONASS AR Mode- Off ROVER Set up : Correction Input: Serial, UART, Buad Rate 57600, RTCM3 :Position Output: TURN OFF :Base Mode: TCP, Server, Local host, port 9000 (same your in rover or base) : Correction Input and Position Output: Turn Off Mission Planner: unsure your running latest update. Full Parameters List: Serial4 Baud Rate-57 (57600) : Serial4 Protocol- 5 (GPS…