Hi @igor.vereninov @egor.fedorov @bide, now I’m trying ntrip mode in static, but no fix. And change to kinematic, just a few seconds, get fix. Before I’m trying wifi mode was same, just float in static, fix in kinematic. Is there any reason for this?
I have noticed something similar. Will have a check.
Okey, thank you @igor.vereninov for your response. Keep the spirit…
@dicky Could you please upload log files (raw,base,solution in LLH) where the issue is visible? Are you on 2.1.5?
I run in xyz. Yes i run 2.1.5. i will try to observe tomorrow. And upload base, rover, and solution files in llh.
This is my log file in xyz
I will test it today, static with ntrip, insyaa Allah. Thank you.
I’m running static NTRIP now. Observe with ReachView and RtkLiB 2.4.3 b23. ReachView always fix after a few seconds float, then fix until now. But, RtkLiB fix in first, then float antil now
Any difference using RTKlib 2.4.3 b26 ?
As my promised, I will upload my log files in llh
I have no any information about b23 or b26. Where we can download b26? Thank you
I have no any information about b23 or b26 on that website. Where we can download RtkLiB b26 version? Thank you
Im having a hard time open your raw .ubx file, but no problem open my own. Strange
RTKlib 2.4.3 b26 https://github.com/tomojitakasu/RTKLIB_bin/archive/rtklib_2.4.3.zip
What about the problem? Is there any permission or other something?
Thank you for the download link.
It says no observation data - error opening-
It might be me not doing it right. Gonna try a bit more