Advice on what to buy

[bide]

I’m looking at the company behind the website, and this line drawing of the rovers they advertise is looking pretty familiar.

[timd1971]

What Height is to be plugged in here?

Assuming Ellipsoid Height at coords location or to bottom of RS/RS+ +65mm?

[bide]

My guess would also be height relative to the ellipsoid.

I wonder if it will show a bunch more satellites if one was assumed to be flying at 32,808 feet and used a cutoff angle of negative 10 degrees?

[timd1971]

I think u may have to settle for 0 deg, as i don’t think it will take -10 deg.

[timd1971]

Take a look at this:

@bide on Reach RS2

Here is a little tidbit for you: An RS+ works under partially obstructed sky and gets a good fix over LoRa from an RS2 base nearby: [Screenshot_20190616-193940] [Screenshot_20190616-193947] The skyview of the rover is a 66 degree clear swath overhead; a building is 1m to the south, 2m taller than the antenna; and another taller building is 9m to the northeast; and a small stand of trees to the north 18m away with tops 24m above the antenna. I had all constellations enabled on the RS+ and ch…

[birdofprey]

I don’t understand what to put in the Settings tab under the entries: “height” and “cutoff”.

In the Obstructions tab I don’t understand how to recreate a 50 meter high pit.

[birdofprey]

@timd1971

Take a look at this:
@bide on Reach RS2 - #36 by bide

I will read everything very carefully.

[birdofprey]

Considering all this information, I believe that the best strategy for my case is RTK with multiband station and base.