Reach / Reach RS+ / RS2   RTK / Post-processing


Topic Replies Activity
RTK / Post-processing 1 September 20, 2016
Static measurement RS+ 5 October 23, 2019
Cellular Data Service for RS2 built in modem for NTRIP Connection (in US) 36 October 23, 2019
Coordinate input to *.obs file / RS2 2 October 22, 2019
OPUS Aborted RS2: Collection interval was not one of the allowed rates 7 October 22, 2019
ReachView Survey log and Rinex raw log timing mis-alignment 6 October 21, 2019
.POS or .LLH? 23 October 19, 2019
Changing ellipsoidal heights to geoid 12 October 18, 2019
Reach RS2 Datum 3 October 18, 2019
RTK and Post Processing Project 5 October 18, 2019
FYI - rtkpost GPX bug & workaround 4 October 14, 2019
Rinex file transfer via built in modem 2 October 11, 2019
Height, elevation, ellipsoid and datum clarification needed 5 October 10, 2019
RTK Explorer Help 22 October 8, 2019
How to convert ITRF2014 result to WGS84? 7 October 7, 2019
PPK creating a known point using "base" and CORs Data 14 October 7, 2019
Converting UBX to Rinex for processing through opus 41 September 20, 2019
Help Needed for PPK Quality 8 September 30, 2019
Reach RS2 and MicroSurvey FieldGenius 31 September 28, 2019
RS2 LoRa timing 12 September 27, 2019
RS2 Ubx to Rinex 3.03 converting issue with EZSurv and RTKConv 29 September 27, 2019
Solution Type; Code Diff 4 September 25, 2019
PPK Missing Events 25 September 25, 2019
Convert .pos file in .gpx 4 September 24, 2019
Reach RS+ || RTK goes off when rover is 300m away from base 10 September 23, 2019
Advise on Reach RS (not RS+) and M (not M+) rtk option/s setup 10 September 20, 2019
Trouble with RTKLIB and Phantom 4 RTK Data 7 September 18, 2019
PointMan App with Reach RS+ 13 September 17, 2019
Static Survey and Post processing with RS2 34 October 11, 2019
Magnet Field V5.2.1 9 September 10, 2019