Community Forum

Navio / Edge   Getting started

Getting started with Navio+/Navio2 (1)
Problem with ardupilot (1)
How to write a python script on NAVIO/ raspberry pi 3 (6)
How to get measures of Navio2's sensors in a C(not C++) program (2)
I cant get the motors to respond to Servo.py (17)
Speed Controller and Navio2 Protocol Issue (13)
Cant't arm/takeoff due to bad compass health (12)
How to arm the motors without radio transmitter/receiver? (2)
Battery Voltage (2)
QGroundControl & Navio2 connecting issue (6)
No more access via ssh after connection to Mission Planner (7)
Arrow indicator on Navio Power module? (4)
Use external state estimation node for ardupilot (3)
Unable to calibrate ESC on Navio2 (3)
External Compass Calibration Fails - Unexpected Error (2)
Sending low level manual flight commands to navio2 board (2)
Navio 2 - Run Pytho scripts for sensors on a Raspbian Stretch (3)
Unable to connect to Emlid Edge ssh (9)
Navio 2 Video Streaming Over Radio Telemetery (4)
USB Camera Guide (13)
I need c code (7)
New Hexacopter with Rpi3/Navio2 (5)
Connecting my navio2 board to mission planner (13)
NAVIO2 and Mission Planner Getting Params does not work (9)
Navio2 (4)
Video Transmission possible to an FPV monitor with HDMI input (2)
Emlid Edge with UGCS Pro flight planner (2)
Auto login (5)
Wheel Odometery data to Navio2 (4)
How to send commands via Wifi? (4)