mlebret
(Marc Lebret)
5
Hello,
Mission planner method is not valid for Navio firmware update, and apt-get is only working when source is updated (not yet).
Official howto is here (refer to firmware link above, firmware.eu is no longer in use).
https://docs.emlid.com/navio2/common/ardupilot/installation-and-running/#launching-a-custom-ardupilot-binary
If you are familiar with linux, you can look at this post and adapt the commands to ardurover.
with same remark for firmware link. Following theses instructions, you have not to change the ardurover.service.
Marc
1 Like
