Reach image 2.3 flashing problem

[morcka]

Updating reachview fom 2.0.9 to 2.2.5

Hello Everyone I finally figured this out and got it to work maybe I am just to thick headed some times. The problem for me was that I followed the link above from Igor. For Windows 10 the way I got it to work was follow the firmware flashing document at that link but after doing the Choose Image to flash screen it would start and then this screen comes up [image] You have to unplug the reach unit and then plug it back in then the program does the update.(that screen does not say to unplug…