PPK Settings on Reach

[TB_RTK]

Ok, all events is saved in the raw file.
When you camera is hooked up properly to reach , the setting you apply here counts for when triggering is happening
https://docs.emlid.com/reach/common/reachview/camera-control/

Here are some linke to similar, if that might help

Reach beta 2.1 - Hardware integration and how to trigger Sony a6000

@Sylvain_POULAIN is right, using flight controller to trigger came is the best way. Alternatively camera can be set to continuously shoot photos with a certain period (sometimes called “timelapse mode”).

Camera Triggering

Hi, You will need a hotshoe cable connected to Reach. After the flight logs are processed as shown here: https://docs.emlid.com/reach/gps-post-processing/ You will need to use geotagging software to embed processed coordinates in EXIF.

Timestamps 0.1sec. Camera recommendation?

No, you will also connect the hotshoe adapter to the time mark input on Reach. Timestamps will be in the raw data logs, you process the logs with RTKLIB and get a list of coordinates for the timestamps.