Broadcasting the output of the firmware in the network

[mikhail.avkhimenia (Mikhail)]

Hi Daniel,

-C udp:127.0.0.1:14550 should work.

Some additional info may be found in the following discussion:

Establish telemetry link after wwan0 is re-initiated(SOLVED)

Hi I have made cronTab script checking whether or not RPI is online, and if necessary re-connects 4G network. This is working, but i have one issue after wwan0 network is re-initiated, I’m not receiving APM UDP Telemetry data… If i do the same test with only using Eth0 and just unplug/plug Ethernet cable, telemetry are instantly received to GCS. I don’t know what’s happening behind the scene, but it seems like after wwan0 is going down or re-initiated, APM try to send data packets to eth0 ev…